Step 1

Shake product well for optimum performance.

Step 2

Pour three to four capfuls of ceramic car wash and wax into a gallon-sized bucket of water.

Step 3

Start by rinsing your car with a hose from top to bottom to dislodge any loose soils and residues.

Step 4

Mix and activate soap and water solution with a powerful stream of water or a car wash mitt until solution becomes thick and foamy.

Step 5

Starting from the top down, scrub and rinse your car in small, 2’ x 2’ sections, one section at a time so that soap doesn’t dry on your car. Avoid washing surfaces that are hot to the touch in direct sunlight to prevent water spotting on your car’s finish.

Step 6

When you have washed and rinsed all sections of your car, dry with a clean, microfiber towel or using a blower.

Step 1

Wash and dry the car.

Step 2

This product does not require surface prep before use; however, we recommend applying a clay bar to your finish to remove stains from the finish, such as those created by tar, bug residue or bird droppings, for the best product results.

Step 3

Shake container and spray two mists of product in a 2’ x 2’ section.

Step 4

Using a microfiber towel, wipe the spray coating into the finish.

Step 5

Flip the cloth to a clean, dry side and buff to a mirror-like shine.

Step 6

Move to the next 2’ x 2’ panel and repeat around the car.

Step 7

For maximum protection and an even higher shine, allow Ceramic Spray Coating to cure for 24 hours before applying a second coating to your car exterior, repeating steps 2-6.

Step 1

This product is best used to clean light dirt and residues from the surface of your vehicle. For a more heavy-duty surface restoration, check out our Hybrid Solutions Ceramic Spray Coating or Ceramic Wet Wax to get the power you need to achieve that flawless finish.

Step 2

If your car or truck is lightly dusted or has only water spots, spray the car wax spray onto a microfiber towel or spray it directly onto a 2’ x 2’ panel of your vehicle and wipe across the finish.

Step 3

Flip your towel to a dry spot and buff the treated area to a sparkling-clean shine.

Step 1

Wash and rinse your car using a thorough car wash solution, such as our Max Power Car Wash, for optimum product performance.

Step 2

While the car is still wet, spray Turtle Wax Hybrid Solution Ceramic Wet Wax on the entire exterior. It’s safe for all surfaces, including tires and glass.

Step 3

Using a microfiber towel, wipe the car dry to a beautiful shine.

Step 1

Clean and vacuum the inside of your car before use, removing all stains and soils.

Step 2

Spray all fabrics until fully saturated, including carpet, seats, headliners and boot liners.

Step 3

Allow product about 15 minutes to dry.

Step 4

Wipe away any excess product from hard surfaces with a clean microfiber towel.

ODOR X ODOR ELIMINATOR AND REFRESHER

Step 1

Clean and vacuum the inside of your car before use, removing all stains and soils.

Step 2

Spray all fabrics until fully saturated, including carpet, seats, headliners and boot liners.

Step 3

Allow product about 15 minutes to dry.

Step 4

Wipe away any excess product from hard surfaces with a clean microfiber towel.