SNOW FOAM

Step 1

Rinse your car with a strong stream of water from your pressure washer, removing all loose soils and grime.

Step 2

Pour 6 to 12 ounces of Snow Foam into your foam gun canister.

Step 3

Again, using your pressure washer, spray foam onto your car, sweeping from the top of the car to the bottom. If necessary, adjust the nozzle to create maximum foam.

Step 4

Using a clean, soft wash mitt, gently wash the entire exterior including glass, plastic, wheels and tires.

Step 5

Rinse thoroughly.

Step 6

Towel dry.

FRESH SHINE VANILLA

Step 1

For best product performance, shake well to evenly disperse active ingredients throughout the formula.

Step 2

Test product on an inconspicuous area to check if product is compatible with your interior surfaces.

Step 3

Spray product evenly onto plastic interior surfaces, holding the can about 15 cm away.

Step 4

Allow product to dwell for 30 seconds.

Step 5

Buff surfaces with a clean, microfibre towel, removing any excess product for a smooth, glossy sheen.

ORIGINAL HARD SHELL SHINE CAR WAX

Step 1

Ensure paintwork is cleaned and dry, shake bottle well.

Step 2

Working on one panel at a time, pour wax onto a clean cloth and apply using an overlapping circular motion.

Step 3

Allow to dry to a haze, then wipe off using a clean soft cloth.

Step 4

Buff lightly to bring out the shine.

Tips:

Do not use on non-painted plastic, wood, decals, or flat paint. Do not use in direct sunlight or if surface is hot to the touch.